Trimming Line

TRIMMING LINE MARBLE DIMENSIONS CUTTING LINE TECHNICAL SPECIFICATION
2 Heads Marble Sizing Machine
Ø Saw's engine power 4 kW
Ø Belt’s engine power 1 Hp
Ø Belt speed 0-3 m / min
Ø Water consumption 8 lt / min
Ø Working capacity of the one day 300 m2 / 8 Saat
Ø The belt act to with speed control system
Ø Cutting capacity of the machine is between 200 mm and between 650 mm
Ø Width of the belt 750 mm
Ø Belt is type rubber
Ø Triming Machines has a PLC control system.
Turning Roller
Ø The roller has table system.
Ø The roller has a 90° turning robot.
2 Heads Marble Sizing Machine ( Trim – Dimensions )
Ø Saw's engine power 4 kW
Ø Belt’s engine power 1 Hp
Ø Belt speed 0-3 m / min
Ø Water consumption 8 lt / min
Ø Working capacity of the one day. 300 m2 / 8 Saat
Ø The belt act to with speed control system .
Ø Cutting capacity of the machine is between 200 mm and between 650 mm.
Ø Width of the belt 750 mm.
Ø Belt is type rubber.
Ø Triming Machines has a PLC control system.
cutting engine | 4 KW 5,5 Hp |
---|---|
Band engine | 0.75 Kw 1 Hp |
Band speed | 0-5 m/min |
Band width | 750mm |
Band Type | Polyurethane |
Max. Cutting width | 750 mm |
Max. cutting thick | 50mm |
Marble Machine Products
4+14 700 Moving Automatic Marble Polishing Machine
[...]
May
8 Heads 700 mm Moving Automatic Marble Polishing Machine
[...]
May
7 Heads Dimensions Machine
[...]
May
3+3 700 mm Moving Head Automatic Marble Polishing Machine
[...]
May
Side Polishing and Chamfering Machine (11 Heads)
[...]
May
3 Heads Calibration Machine (700 mm)
[...]
May
3+4 Fixed Heads 500 mm Automatic Marble Polishing Machine
[...]
May
2 Heads Cutting Machine (Triming)
[...]
May
12 Heads Slab Polishing Machine
[...]
May
Waving Systems Head Cutting Machine
[...]
May
5 Heads Cement Filling Machine
[...]
May
15 Heads 700 mm Moving System Granite Polishing Machine
[...]
May
4 Heads Horizontal Split Machine
[...]
May
Marble Writing Machine (PANTOGRAPHY)
[...]
May
15 Heads Side Polishing And Chamfering Machine
[...]
May
Trimming Line
[...]
May
2 Heads Trimming Machine
[...]
May
3 Calibration + 12 Marble Polishing Machine
[...]
May
6 Heads Calibration Machine
[...]
May
Head Cutting Machine Turkey
[...]
May